Gears

CYMA trigger box, suitable for CYMA CGS series gas airsoft rifles. A replacement part for the trigger mechanism of the replica.

Features

• Compatible with CYMA CGS gas rifles

The Specna Arms tappet plate delayer mounts on the sector gear of V2 gearboxes and delays the movement of the tappet plate for proper BB feeding. It is especially useful in high rate of fire builds.

Features

• Compatible with V2 gearboxes

The original Marui gear kit for M14 is designed for the gearbox of the M14 airsoft replica and is a replacement part for the internal mechanism.

Features

• Original Marui gear kit
• For the M14 model

The Specna Arms steel gear set is designed for Specna Arms Core and Edge series airsoft replicas. It is a suitable replacement part for gearbox maintenance or repair.

Features

• Steel construction
• Compatible with Specna Arms Core/Edge series replicas

The Specna Arms 16:1 gear set is made of CNC-machined steel, for upgrading the gearbox of AEG airsoft replicas. The 16:1 ratio increases the rate of fire compared to standard 18:1 gears.

Features

• CNC-machined steel construction

Specifications

• Gear ratio: 16:1

The Specna Arms 16:1 helical gear set is machined on precision CNC machines, which improves the operation of the mechanism and reduces noise and energy consumption. The lower gear ratio provides faster, high speed operation.

Features

• Reinforced gears with an improved axle
• Quiet operation thanks to the angled teeth
• Smoother operation: the beveled teeth have more contact points and distribute the load evenly
• Increased durability: helical teeth withstand higher loads than straight ones
• More precise motion control

Specifications

• Gear ratio: 16:1

The Specna Arms 18:1 gear set is made of CNC-machined steel and is the standard ratio for AEG airsoft replica gearboxes. It is suitable both as a replacement part and for balanced builds.

Features

• CNC-machined steel construction

Specifications

• Gear ratio: 18:1

The Specna Arms 18:1 gear set is made of CNC-machined steel and is the standard ratio for AEG airsoft replica gearboxes. It is suitable both as a replacement part and for balanced builds.

Features

• CNC-machined steel construction

Specifications

• Gear ratio: 18:1

The Specna Arms 16:1 gear set is made of CNC-machined steel, for upgrading the gearbox of AEG airsoft replicas. The 16:1 ratio provides a good balance between rate of fire and spring pulling force.

Features

• CNC-machined steel construction

Specifications

• Gear ratio: 16:1

The Specna Arms CNC 13:1 gear set is made of steel by precision CNC machining. The quality parts are excellent for tuning AEG airsoft replicas, delivering a high rate of fire.

Features

• Steel construction
• Precision CNC machining
• Suitable for tuning AEG replicas

Specifications

• Gear ratio: 13:1

The Snow Wolf gear set is designed for Barrett M82A1 electric replicas made by Snow Wolf. The metal construction provides durability in intensive use and is suitable as a gearbox replacement part.

Features

• Metal construction
• Compatible with Snow Wolf Barrett M82A1 series electric rifles

The SHS 16:1 high speed gear set is designed for upgrading the gearbox of AEG airsoft replicas, for a higher rate of fire than with standard gears. It is a popular option for builds focused on a high rate of fire.

Specifications

• Gear ratio: 16:1

The Royal metal gear set is designed for the gearbox of L85 airsoft replicas. The gears are identical to the original ones for the model and are suitable as replacement parts for repairs or maintenance.

Features

• Metal gears for the L85 gearbox
• Identical to the original L85 gears

The Royal metal gear set with the standard 18:1 ratio is suitable for version II and III gearboxes of AEG airsoft replicas. It is a practical solution for replacing worn gears.

Features

• Standard metal gears
• Bearing on gears II and III
• Compatible with version II/III gearboxes

Specifications

• Gear ratio: 18:1

The RetroArms Pandora 20:1 gear set is made entirely by CNC machining from hardened steel, for upgrading the gearbox of AEG airsoft replicas. It is a solid choice for setups that demand strength and precise operation.

Features

• Sector gear with 19 teeth, designed for the SR25 series
• Gears fully CNC-machined from high-quality hardened steel
• Complete set: piston gear, sector gear and bevel gear
• Tested with an M210 spring in a RetroArms gearbox, with a RetroArms piston and other parts, over thousands of BBs fired

Specifications

• Gear ratio: 20:1
• Axle diameter: 3 mm
• Gear weight: 66 g

Package Contents

• Pandora gear set (piston gear, sector gear, bevel gear)
• CNC low profile bushings RA-6843

The RetroArms Pandora 20:1 gear set is made entirely by CNC machining from hardened steel, for upgrading the gearbox of AEG airsoft replicas. It is a solid choice for setups that demand strength and precise operation.

Features

• Gears fully CNC-machined from high-quality hardened steel
• Complete set: piston gear, sector gear and bevel gear
• Tested with an M210 spring in a RetroArms gearbox, with a RetroArms piston and other parts, over thousands of BBs fired

Specifications

• Gear ratio: 20:1
• Axle diameter: 4 mm
• Gear weight: 66 g

Compatibility

• Compatible with all RetroArms bearing types of the matching diameter

The RetroArms Pandora 16:1 gear set is made entirely by CNC machining from hardened steel, for upgrading the gearbox of AEG airsoft replicas. It is a solid choice for setups that demand strength and precise operation.

Features

• Gears fully CNC-machined from high-quality hardened steel
• Complete set: piston gear, sector gear and bevel gear
• Tested with an M210 spring in a RetroArms gearbox, with a RetroArms piston and other parts, over thousands of BBs fired

Specifications

• Gear ratio: 16:1
• Axle diameter: 3 mm
• Gear weight: 64 g

Package Contents

• Pandora gear set (piston gear, sector gear, bevel gear)
• CNC low profile bushings RA-6843

The RetroArms Pandora 13:1 gear set is made entirely by CNC machining from hardened steel, for upgrading the gearbox of AEG airsoft replicas. It is a solid choice for setups that demand strength and precise operation.

Features

• Gears fully CNC-machined from high-quality hardened steel
• Complete set: piston gear, sector gear and bevel gear
• Tested with an M210 spring in a RetroArms gearbox, with a RetroArms piston and other parts, over thousands of BBs fired

Specifications

• Gear ratio: 13:1
• Axle diameter: 4 mm
• Gear weight: 66 g

Package Contents

• Pandora gear set (piston gear, sector gear, bevel gear)
• CNC low profile bushings RA-7405

The RetroArms Pandora 13:1 gear set is made entirely by CNC machining from hardened steel, for upgrading the gearbox of AEG airsoft replicas. It is a solid choice for setups that demand strength and precise operation.

Features

• Gears fully CNC-machined from high-quality hardened steel
• Complete set: piston gear, sector gear and bevel gear
• Tested with an M210 spring in a RetroArms gearbox, with a RetroArms piston and other parts, over thousands of BBs fired

Specifications

• Gear ratio: 13:1
• Axle diameter: 3 mm
• Gear weight: 64 g

Package Contents

• Pandora gear set (piston gear, sector gear, bevel gear)
• CNC low profile bushings RA-6843

The Retroarms Pandora 20:1 CNC gear set is designed for airsoft replicas and is made of hardened steel.

Features

• Gears fully CNC-machined from high-quality hardened steel
• Supplied as a set: piston gear, sector gear and bevel gear
• Tested with an M210 spring in the Retroarms Mechabox, with a piston and other parts from the Retroarms family, over thousands of BBs
• Compatible with all Retroarms bearing types of the matching diameter

Specifications

• Gear ratio: 20:1
• Bearing axle diameter: 3 mm
• Weight: 64 g

Package Contents

• Piston gear
• Sector gear
• Bevel gear

The Modify Quantum gear set is designed for Version 2, 3 and 6 airsoft gearboxes, in combination with inner barrels up to 363 mm.

Features

• Modify Quantum gear set
• Compatible with Ver. 2/3/6 gearboxes

Specifications

• Inner barrel length: 363 mm or shorter

The Modify Speed gear set is designed for Version 2, Version 3 and Version 6 airsoft gearboxes, for a higher firing speed.

Features

• Gear set, Speed variant
• Compatible with Ver. 2, Ver. 3 and Ver. 6 gearboxes

ICS gear set for the gearbox of airsoft replicas, a replacement part or upgrade for the internal mechanism.

Features

• ICS gear set

The Gate Eon 13:1 short stroke CNC gear set is a set of CNC-machined steel gears for the gearbox of airsoft replicas. It is developed for reliability and high performance in intensive use.

Features

• High-quality CNC-machined steel gear set
• Designed for springs up to M160 in semi-auto and up to M140 in full-auto
• Compatible with modern brushed and brushless motors
• The precisely set position of the tappet plate pin allows the nozzle to open and close correctly
• The nozzle stays sealed longer with the hop-up rubber, for better FPS stability, especially in full auto
• Developed in collaboration between Gate Enterprise and Solink Motor

Specifications

• Gear ratio: 13:1
• Short stroke variant

The Gate Eon 18:1 CNC gear set is a set of CNC-machined steel gears for the gearbox of airsoft replicas. It is developed for reliability and high performance in intensive use.

Features

• High-quality CNC-machined steel gear set
• Designed for springs up to M160 in semi-auto and up to M140 in full-auto
• Compatible with modern brushed and brushless motors
• The precisely set position of the tappet plate pin allows the nozzle to open and close correctly
• The nozzle stays sealed longer with the hop-up rubber, for better FPS stability, especially in full auto
• Developed in collaboration between Gate Enterprise and Solink Motor

Specifications

• Gear ratio: 18:1

The Gate Eon 13:1 CNC gear set is a set of CNC-machined steel gears for the gearbox of airsoft replicas. It is developed for reliability and high performance in intensive use.

Features

• High-quality CNC-machined steel gear set
• Designed for springs up to M160 in semi-auto and up to M140 in full-auto
• Compatible with modern brushed and brushless motors
• The precisely set position of the tappet plate pin allows the nozzle to open and close correctly
• The nozzle stays sealed longer with the hop-up rubber, for better FPS stability, especially in full auto
• Developed in collaboration between Gate Enterprise and Solink Motor

Specifications

• Gear ratio: 13:1

Reinforced metal G&G sector gear, a replacement part or upgrade for the gearbox of G&G airsoft replicas.

Features

• Reinforced metal construction

Reinforced G&G bevel gear with 10 teeth, a replacement part or upgrade for the gearbox of G&G airsoft replicas.

Features

• Reinforced construction

Specifications

• Number of teeth: 10

G&G bevel gear for the 2.0 gearbox of G2 and G2H series airsoft electric rifles.

Features

• Compatible with G2/G2H series electric rifles

The G&G set consisting of a bevel gear and a motor pinion is suitable for G2 series airsoft electric rifles.

Features

• Bevel gear and motor pinion
• Compatible with G2 series electric rifles

The G&G Hyper Torque helical gear set is made of metal and is designed for G&G airsoft replicas, with an emphasis on high torque.

Features

• Metal construction
• Hyper Torque helical gears

The G&G Original Torque gear set is designed for G&G electric airsoft replicas (AEG) and emphasizes torque.

Features

• Original Torque gear set

The E&L Airsoft standard steel gear set is suitable for Version 2 and 3 airsoft gearboxes.

Features

• Steel construction
• Compatible with Version 2 and 3 gearboxes

Specifications

• Total weight: 60 g

D|Boys metal selector gear, suitable for D|Boys 4781 airsoft electric rifles.

Features

• Metal construction
• Compatible with 4781 electric rifles

D|Boys sector gear with magnet, suitable for the D|Boys DB116 ETU electronic unit. A part for the gearbox of electric airsoft replicas.

Features

• Sector gear with magnet
• Compatible with ETU DB116

The D|Boys 32:1 CNC gear set is made of CNC-machined metal and is designed for the gearbox of airsoft replicas.

Features

• CNC-machined metal construction

Specifications

• Gear ratio: 32:1

The D|Boys 18:1 CNC gear set is made of CNC-machined metal and is designed for the gearbox of airsoft replicas.

Features

• CNC-machined metal construction

Specifications

• Gear ratio: 18:1

The D|Boys 16:1 CNC gear set is made of CNC-machined metal and is designed for the gearbox of airsoft replicas.

Features

• CNC-machined metal construction

Specifications

• Gear ratio: 16:1

The D|Boys 13:1 CNC gear set is made of CNC-machined metal and is designed for the gearbox of airsoft replicas.

Features

• CNC-machined metal construction

Specifications

• Gear ratio: 13:1

The Big Dragon 32:1 steel gear set has an improved 4 mm axle and is designed for the gearbox of airsoft replicas, for those who want a torque-oriented ratio.

Features

• Steel gears
• Improved 4 mm axle
• 8 mm bushings and spacers

Specifications

• Gear ratio: 32:1
• Axle diameter: 4 mm
• Bushings: 8 mm